Four solutions to solve computer CPU overheating

Computer CPU overheating is a common problem faced by many computer users. When the CPU temperature is too high, it will not only cause the computer performance to decline, but may also cause hardware damage. Therefore, it is crucial to solve the problem of computer CPU overheating. This article will introduce four effective ways to solve this problem.

No.1: Clean the radiator and fan

Radiators and fans are key components for CPU cooling. They usually accumulate dust and dirt, which reduces the cooling effect. Therefore, cleaning them regularly is an important step to prevent CPU overheating. You can use a blow can or a soft brush to gently remove dust from the radiator and fan. At the same time, you should also ensure that the radiator and fan are firmly connected to ensure that the radiator can work properly.

No.2:  Application of silicone thermal conductive film

Silicone thermal pad is a material with good thermal conductivity that can help the CPU dissipate heat better. When there is a small gap between the CPU and the heat sink, a thin layer of thermal paste can be applied between them. This can improve the efficiency of heat conduction and thus reduce the temperature of the CPU. Before applying thermal paste, the CPU and heat sink surfaces should be cleaned to ensure that they are clean and dust-free.

No.3： Optimize computer air duct settings

The air duct design inside the computer has an important impact on the heat dissipation effect. If the air duct design is poor, heat will accumulate around the CPU, leading to overheating problems. Therefore, optimizing the air duct design can effectively solve the CPU overheating problem. The air duct design can be improved by increasing the number of fans, adjusting the fan position, increasing the radiator area, etc. In addition, you should also ensure that the air flow inside the computer is smooth to avoid blockage.

The last method is to reduce the CPU load. A high CPU load is one of the common causes of overheating. When the computer runs large programs or performs complex calculations, the CPU load increases, causing the temperature to rise. Therefore, reducing the CPU load can effectively reduce overheating problems. You can reduce the CPU load by closing unnecessary background programs, optimizing computer settings, and avoiding multiple tasks at the same time.

In summary, the four methods to solve the problem of computer CPU overheating include cleaning the radiator and fan, applying thermal conductive glue, optimizing the air duct design, and reducing the CPU load. By taking these measures, the CPU temperature can be effectively reduced, the computer performance can be improved, and the hardware life can be extended. In order to keep the computer running normally, it is recommended to perform regular maintenance and cleaning, and pay attention to the reasonable use of the computer and avoid excessive load. This can ensure that the computer always stays within the appropriate temperature range and provides stable and reliable performance.

How to use thermal conductive silicone pad correctly?

1. Clean the surface: clean the surface of the object to be adhered or coated, remove rust, dust and oil stains, etc.

2. Apply glue: unscrew the cap of the hose, pierce the seal with the tip of the cap, squeeze the glue onto the cleaned surface, distribute it evenly, and close the adhered surface to fix it.

3. Curing: When the coated parts are placed in the air, the skin will slowly form. Any operation should be completed before the surface skin forms. The curing process is a curing process from the surface to the inside. Within 24 hours (room temperature and 55% relative humidity), the glue will cure to a depth of 2 to 4 mm. If the part is deep, especially in a part that is not easily exposed to air, the time for complete curing will be extended. If the temperature is low, the curing time will also be extended.

For more information, please contact us: https://www.cmaisz.com/