What are the common faults of digital electronic watches ?

How to better solve the problems of digital electronic watches?

Question 1: My watch suddenly stops working, how can I fix it?

"90% of the cases are battery problems! If the watch is completely unresponsive, it is recommended to replace the button battery (such as CR2032) first. Note: Low-quality batteries are prone to leakage and corrode the circuit. It is recommended to use a battery compartment with a leak-proof design and a Silicone Rubber sealing ring to isolate moisture and high temperature."

Question 2: The digital display is missing strokes or garbled, is the screen broken?

"LCD screen failure may be caused by the following reasons:

1.Poor contact of Zebra Connector:The zebra strips connecting the screen and the circuit board are oxidized or aged, causing signal transmission interruption. Clean or replace them

2.LCD panel life expires (about 5-7 years):

3.The screen is broken due to external impact and needs to be returned to the factory for repair.

Question 3: What should I do if the button fails to work?

"Popular watch buttons are prone to malfunction due to excessive pressure or aging of the silicone rubber keypad. It is recommended to avoid violent operation and regularly clean the dust in the key gaps. High-end models usually use gold-plated contacts and reinforced silicone, which increases durability by more than 50%."

Problem 4: Battery Problem

The battery is an important part of the electronic watch. When the battery is exhausted, the watch will not work properly. Before replacing the battery, make sure to use the correct battery specifications. If the watch battery has been replaced but still does not start, please check whether the battery connection is clean. If it is dirty or oxidized, use a cotton swab dipped in alcohol to gently wipe it.

Problem 5: Inaccurate time

The accuracy of your digital watch time is critical to your daily life. If your watch clock is inaccurate, first check if there is a time zone setting problem. After changing the time zone setting, the watch should be calibrated to the correct time. If the problem persists, you can try manual calibration. Most digital watches are equipped with a calibration button or knob. You can calibrate the time accuracy by stopping the watch at the correct time and pressing the calibration button.

Problem 6: Water and Moisture

Electronic watches are usually water-resistant, but not all watches are completely waterproof. If a watch is exposed to water, take it out immediately and clean and dry it as soon as possible. Use a soft cloth to gently wipe the watch case and strap, and make sure all buttons and knobs are closed. If a watch is exposed to water or moisture, it should be sent to a professional repair center for inspection immediately to avoid damage to the internal parts of the watch.

Question 7: Screen damage

The screen of an electronic watch is its most fragile part and may be damaged by collision or impact. If the watch screen is scratched, cracked or damaged, it is recommended to go to an authorized service center for repair or replacement as soon as possible. Before repair, you can try to use a screen protector to protect the watch screen and avoid contact with sharp objects.

Problem 8: Functional failure

Sometimes certain features of your digital watch may malfunction or stop working. In this case, first try restarting the watch by pressing and holding the power button or using the designated restart function. If the problem persists, you can try restoring the watch to factory settings.

For more questions, please contact: https://www.cmaisz.com/